Skip to main content

Free Seed Bead Necklace Patterns For Beginners

  
 Bead is one of the beautiful and essential costume for ladies and women. It has basic principles and patterns to follow while beading. Beading work comes with being patient, focus, concentration, and the ability to be creative about the different designs that you make, which in turn makes your necklace looks like its some sort of robot or a machine that made it not knowing that its you as a person that came up with something spectacular and eye - catching  designs...smiles. Different designs are used with different kinds of beads like the swarvoski, crystals, Italian corals, seed beads and so on. Current bead designs are focused mainly in summer trends and outfit that  go with it. 
   The latest bead styles are numerous which I can't possibly mention all in this article where designs are being adorned with fancy brooches, pendants, precious stones to mention but a few.

 What exactly is Seed Bead Necklace?
Seed Bead are small beads (tiny) used in a wide variety of project ranging from simple stringing to complex bead weaving to embellish wire jewelry creations. They come in many colours as possible and shapes, making them useful for incorporation in an assorted of jewelry projects. Its sizes ranges from size 1 -3.

 What Are The Pros Of Seed Bead Necklace?

1. It help you to flex your muscle while combining a variety of  colours and materials that suit your personality.

2. It makes you be the boss because you tend to make it yourself  either by selling it to make more income from it or you feel fulfilled  and proud of your self to wear your own creations.

3. It allows you to stretch your creative ability by exploring different designs  by choosing the quality of beads to use in order to make it to
 your taste.

 Cons
1. It is time consuming: Seed bead designs are stressful and takes time to finish up. But with determination it is possible to make.

2. You need to be very patient due to the size of the bead, it's so tiny and does not seem to move fast while making a design. Hence, patience  and concentration is needed in order not to make mistakes.

3. Be ready to have more needles to work with in your disposal. Depending on some designs, you may end up using a whole pack of needles.

Here, below are some designs of seed bead patterns that can be made as bracelet, rings, earrings and many designs you can think of just with seed bead.

        Bracelet Pattern
Seed Bead bracelets are one of the most common ways to create various styles of homemade bracelets. They are fun to wear.
Blue and silver bracelet



     Seed Bead Rings
Seed beads are beautiful while  making multiple colours of these ring patterns. Examples of these are: peyote beaded ring, the Pearl single ring and many  others.

A peyote beaded ring



   Seed Bead Earrings 
Beading gives you a way to be creative and to make something that matches your favourite colour and style. This are some designs of the earrings that can be made with seed bead.

 A red seed bead earring.

A coral bead earring.

However, I have complied a list of instructions on how to make two seed bead patterns.

       Seed Bead Patterns
Spiral bead Pattern


Materials needed for these are:
 fishing line, needle, seed beads and hook.

Steps to make spiral design
1. Cut your desired fishing  line and insert your needle.

2. Pick 8 Seed beads(SB)and pass your needle upside down through the four SB underneath.

3. Pick 5SB and push away 4 SB and pass your needle into four SB ( I.e the 1 SB remaining from the five you dropped,add 3 SB under plus 1 and pass the needle into the four SB at once)

4. Continue this process by dropping 5SB and passing your needle into four SB until you get your desired length.

5. Then attach your hook.

Note: You can combine two colors here in order to bring out the beauty and if you intend to double your spiral that means you will have to do it one layer at a time.


 Abuja Connection Pattern



    This design is so lovely and easy to make when you follow the procedure. Depending on your choice, you can make it with a bigger beads all through or seed beads or mix of seed bead and crystal bead...that will be lovely right? Smiles...

Now let's get to work, you will be needing an 0.30m fishing line or cord, needles, clasps, scissors, bigger beads (I love crystals) and our beautiful seed bead (you can use any colour you prefer).

Step 1: Cut a length of fishing line (this will depend on the length of your neckline) and insert the needle on both sides of the line.
You can as well do it without needle, the needle only make your work easier and faster.

Step 2: Add 3 SB( seed beads) and interlock with 1 CB( crystal Bead)

Step 3: On each side of the line, you pick 6 SB and interlock with 1 CB.

Step 4: Add 1CB on each side then interlock with 1 CB.

Now repeat step 3 & 4 all over again till you get to your desired length.
When you are done with that stage, its time to add new layers and  go to the second stage.

Step 5: insert a fishing line to one of the middle beads on the  edge part of the first stage and add 2 SB on the right hand side of the line and interlock with 1 CB on the left line.

Step 6: Add 7 SB on each sides of the line (the seed beads here will increase by one) and interlock with 1 CB.

Step 7: Add 1 CB on each sides of  the line and interlock with 1 CB. Then continue step 6&7 till you finish the second stage.

N: B  For every layer, the number of beads will increase by 1.
Follow the same pattern if you decide to add more layers. For the third stage,the seed bead will be 8 in number and it continues  like that for as many layers as possible.
Note: The middle beads will always remain four in number. Then finish your necklace by adding your clasps or hook.
Awesome...the Abuja connection design is ready.  I am sure you can make your creations from seed beads now. I hope you find this post very helpful.

Comments

Popular posts from this blog

How to Make Onion Bulb Necklace Design

    Life is in phases where you pass through one stage after another, that is why you need to be so determined to cross over to that height you desire. That being said, life is like an onion where you have to peel one layer at a time and sometimes you weep.          Here, the necklace design will be in form of an onion that has layers upon layers...smiles. Hence, its named onion bulb design made with beads.  Materials for this design include: Seed bead (colour blue size 2, seed bead (Another colour pink) size 3 ,needle, fishing line 0.30mm. N:B: The 3 SB is colour pink while the 6 SB is colour blue that form the layers. You can  use any colour of your choice. Instructions :  1. Cut a desired length of fishing line. 2. Knot a bead on the extreme end of the fishing line so the beads doesn't fall off. 3. Pick up 3 size 3 SB and pick 6 size 2 SB and pass your needle underneath inside the 3 SB you dropped before. ...

How To Make A Beaded Necklace With Fishing Line

 As humans, we cannot do without the help of others, we need people in life that will support, assist us. Everyone needs someone to get things done at  every point in life. We need each other to survive that's the reason in bead making, every tool is important because without one, the other won't be able to stand alone.         In this context, fishing line is as important as every other tool while beading because, with this tool, you are able to string your beads to make any design you desire. Fishing line can be used when making necklaces, earrings and bracelets to create any design you can think of. It is in different sizes  of 0. 25mm, 0.30mm, 0.35mm, 0.45mm, 0.50mm there is also a stretchy fishing line of 0.5mm, 0.8mm and 1.0mm that you can use in making  a necklace or bracelet that will be easier to wear without attaching your clasp or hook.    Beading generally means stringing your beads onto a line, that 'line' is c...

How To Make A Brooche With Beads

      Have you ever tried to make a brooche with crystal beads before or you feel its not possible. Remember nothing is impossible if you believe. Not to worry, I will be showing you how to do that in this post and you can always use it on any design. I hope you will enjoy while making yours because I did enjoyed mine...Smiles. Materials that Is required Here Are 1. Beading Thread 0.30mm 2. Crystal Beads (CB) 6mm (size 6) 3. Beading Needle 4. Seed Beads 10/0 (size 2) 5. Cutter 1. Cut a comfortable length of thread and insert your needle. 2. Pick seven (7) CB and tie at the extreme, pass the needle into the next CB. 3. Pick nineteen (19) SB and pass the needle to the other CB to form a circle. 4. Pass the needle into the first SB and pick one(1) CB. 5. Pass into the eight (8th) and ninth (9th) SB at once. Then, pick one (1) CB  and pass the needle to the last SB to make it tight. 6. Pass t...